Durga Hydraulics
Puth Khurd, New Delhi, Delhi
GST No. 07BMXPS0533G1ZO
TrustSEAL Verified
Call 0794270357173% Response Rate
SEND EMAIL
Product Details:
| Max Flow | 40 L/min |
| Fluid Temperature Range | -30 to +80 (NBR seal), -20 to +80 (FKM seal) Degree C |
| Viscosity Range | 2.8 to 500 mm2 /s |
| Environment Temperature Range | -30 to +50 (NBR seals), -20 to +50 (FKM seals) Degree C |
| Single Solenoid Weight | 1.5 kg |
| Double Solenoids Weight | 2.0 kg |
| Max Operating Pressure | 315 Bar |
| Country of Origin | Made in India |
Features:
Product Details:
| Brand | THM |
| Max Pressure | 320 Bar |
| Max Flow | 130 to 1400 L/min |
| Cracking Pressure | 4 Bar |
| Body Material | SS |
| Packaging Type | Box |
| Country of Origin | Made in India |
Features:
Product Details:
| Mounting | 3 bolts M10 |
| Ambient Temperature | -40~+60 Degree C |
| Nominal Flow | 120 l/min(see "operating" diagram) |
| Filtration | Oil contamination 10 to NAS1638 |
| Leakage | 30cm3/min at 120 Bar |
| Pressure Connections | Internal Thread |
| Pressure Medium | Mineral oil based hydraulic oil |
| Fluid Temperature | -15 - +80 Degree C |
| Country of Origin | Made in India |
The hydraulic distributor Р120 is used for switching on/off and controlling of the working fluid between head flow generators (hydraulic pumps), head flow consumers (hydraulic cylinders, motors, etc.), and the tanks of hydraulic systems of mobile machines (electrical and diesel forklifts, excavators, auto-cranes, etc.).
Product Details:
| Material | Aluminium |
| Weight | 2.6~2.7 kg |
| Max Flow Rate | 40 L/min |
| Temperature Range | -30 to +80 Degree C |
| Viscosity Range | 2.8 to 500 mm2/s |
| Brand | THM |
| Max Working Pressure | 250 Bar |
| Model No | ET-04 |
| Min Working Voltage | 90% of rated voltage |
| Country of Origin | Made in India |
Features:
Product Details:
| Material | Aluminium |
| Weight | 1.2~1.3 kg |
| Max Working Pressure | 250 Bar |
| Min Working Voltage | 90% of rated voltage |
| Brand | THM |
| Max Flow Rate | 20 L/min |
| Model | ET-02 |
| Country of Origin | Made in India |
Features:
Product Details:
| Brand | THM |
| Model No | P80 |
| Mounting | 3 bolts M8 |
| Pressure Connections | -40~+60 Degree C |
| Pressure Medium | Mineral oil based hydraulic oil |
| Fluid Temperature | -15+80 Degree C |
| Filtration | Oil contamination 10 to NAS1638 |
| Country of Origin | Made in India |
Features:
Product Details:
| Max Pressure | upto 315 bar |
| Brand | THM |
| Max Flow | 300L/min |
| Delay Components | 1.5 with buffeting p max, 4.5 without buffeting p.max |
| Repeatability Precision | <+/-2 |
| Electronic Control | VT-2000S 40 |
| IP Rating | IP65 |
| Country of Origin | Made in India |
Product Details:
| Max Operating Pressure | Up to 30 MPa |
| Voltage | 210 V |
| Power Source | Electric |
| Pressure Fluid Temperature Range | -30 to +80 Degree C |
| Viscosity Range | 10 to 800 mm2/s |
| Secondary Pressure | up to 4 MPa |
| Max Flow | Up to 7 L/min |
| Country of Origin | Made in India |
Pressure reducing valves type ZDR 6 DP0...40B/40YM are pressure reducing valves of sandwich plate design. It is used to reduce the system pressure. The pressure reducing basically valve consists of the housing (1), the control spool (2), a compression spring seating (3) and a compression spring (4). At rest, the valve is normally open, and fluid can flow unhindered from port P to port P1. The pressure in port P1 is at the same time present at the spool area opposite to the compression spring (4). When the pres-
sure in port P1 exceeds the pressure level set at the compression spring (4) the control spool (2) moves into the control position against the compression spring (4) and holds the set pressure in port P1 constant. If the pressure in port P1 rises still further due to extemal forces, the control spool (2) is moved still further to-wards the compression spring (4). Sufficient fluid then flows to tank to prevent any further rise in pressure. The spring chamber is always drained to tank externally via drilling to port T (Y).
Product Details:
| Brand | HD |
| Max Flow | upto 80L/min |
| Max Pressure | upto 315 bar |
| Power Source | Electric |
| Viscosity Range | 10~800 mm2/s |
| Fluid Temperature Rang | -30 to +80 Degree C |
| Packaging Type | Box |
| Voltage | 210 V |
| Country of Origin | Made in India |
Features:
Product Details:
| Size | 6 |
| Model Name/Number | HD AF6E |
| Brand | THM |
| Packaging Type | Box |
| Max Pressure | upto 315 bar |
| Model No | HD AF6E |
| No of Way | 3 Way |
| Country of Origin | Made in India |
Features:
Product Details:
| Material | Cast Iron |
| Color | Black |
| Max Flow | 35 L/min |
| Hydraulic Fluid | Viscosity 35 mm2/s |
| Brand | THM |
| Max Pressure | 250 bar |
| Country of Origin | Made in India |
Product Details:
| Brand | HD |
| Power Source | Electric |
| Voltage | 210 V |
| Viscosity Range | 10 to 800 mm2/s |
| Pressure Fluid | Mineral oil (for NBR Seal) of Phosphate ester (for FPM Seal) |
| Pressure Fluid Temperature Range | -30 to + 80 Degree C |
| Max Operating Pressure | Up to 35 MPa |
| Country of Origin | Made in India |